Announcement

Collapse
No announcement yet.

fuel gauge problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fuel gauge problems

    Hello!!
    I was working on my 05 dodge ram 2500 4wd I had to replace the control arm bushings to due that I took out the fender wells both sides and on the left side I had to unplug the wire harness that went to the back of the truck. Then I got all the bushings replace (hours of cutting) I plugged and put it back together and now my fuel gauge don't work just stays on empty and the low fuel light is on!! I rechecked the wire harness and every thing looks good I even unhooked the batteries for a while and the same checked the codes now it has P0462 and P0463 and on the trip meter it says A4 91 on the cluster!! Any help would be appreciated thanks!!!

  • #2
    I am sure you examined your connection point.

    Is there any way you could have disrupted a ground lead connection?
    Power Wagon Advertiser monthly magazine, editor & publisher.


    Why is it that the inside of old truck cabs smell so good?

    Comment


    • #3
      Thanks for the info I checked the ground and I must have pulled it just the right way and it wouldn't make contact All good now!!!!

      Comment


      • #4
        Great work!
        Power Wagon Advertiser monthly magazine, editor & publisher.


        Why is it that the inside of old truck cabs smell so good?

        Comment

        Working...
        X