Announcement

Collapse
No announcement yet.

Auxiliary Transmissions / Overdrives

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Yah, I've been reading through that thread myself. Definitely some good info.

    Comment


    • #17
      There has been some recent conversation on these units, I would like to get more information on these guys if anyone has any. Thank you
      1967 W200.aka.Hank
      1946 WDX.aka.Shorty
      2012 Ram 2500 PowerWagon.aka Ollie

      Life is easier in a lower gear.

      Comment


      • #18
        Looking at the Laycock version has anyone installed a Gear Vendors unit on a Civilian Power Wagon? I see where they look very similar.
        1967 W200.aka.Hank
        1946 WDX.aka.Shorty
        2012 Ram 2500 PowerWagon.aka Ollie

        Life is easier in a lower gear.

        Comment


        • #19
          mrvolvo

          Matt,
          Thanks for posting this.
          Hopefully, others will chime in that can help me source all the parts
          needed for an overdrive install on my '61 WM300

          Comment


          • #20
            Theres a brownie box for sale near me. Trying NOT to buy it, even though I know I want it.. because its cool!

            If someone is interested, I can share the contact. The owner is very unclear on what he has but he wants $1200 for it in Central Va. It looks super clean.

            Sorry for the thread hi-jack.
            1942 WC53 Carryall in progress.

            Comment


            • #21
              Matt, from what little research I have done the Gear Vendors unit won't fit onto a NP200 or 201 because of the difference in shaft splines. If a guy had a NP205 in his truck it would bolt up just fine. If GV could be persuaded to cut a coarse spline on their input gear, it would be a bolt up unit for the 200 and 201.
              Greg Coffin
              Unrepentant Dodge Enthusiast

              1951 Dodge M37 - Bone Stock
              1958 Dodge M37 - Ex-Forest Service Brush Truck
              1962 M37-B1 - Work in Progress
              1962 Dodge WM300 Power Wagon - Factory 251, 4.89s
              1944/1957 Dodge WM500T 6x6 Power Wagon - LA318-3, NP435, 5.83s, Power Steering, Undercab Power Brakes
              1974 Dodge W200 - 360/727, Factory Sno-Fighter Package

              Comment


              • #22
                Originally posted by Greg Coffin View Post
                Matt, from what little research I have done the Gear Vendors unit won't fit onto a NP200 or 201 because of the difference in shaft splines. If a guy had a NP205 in his truck it would bolt up just fine. If GV could be persuaded to cut a coarse spline on their input gear, it would be a bolt up unit for the 200 and 201.
                Can the input gear for the 200 be swapped with one from a 205? Or are the internals that much different? I know that they share a lot of similar features.

                Or how about an adapter spud shaft similar to how the Bronco Dana 20s functioned? The spud had its own tailshaft adapter housing that would mate to the output and pattern of the transmission? Or now are we getting too long for the front of the T-case to remain divorced?
                1942 WC53 Carryall in progress.

                Comment


                • #23
                  The Gear Vendors overdrive mounts to the output side of the transfer case. Some people say internal parts will swap between the 200 and the 205, others say not. I've never tired so I don't know. If you could put the upper input/output gear cluster from a 205 into a 200, you could mount the GV overdrive to the back of the 200 and have overdrive in 2wd.

                  Or you could swap a divorced 205 into a Power Wagon. The hardest part is finding a conversion u-joint for the intermediate shaft and output shafts. The 205 has fine spline shafts, so the 200/201 yokes won't fit.
                  Greg Coffin
                  Unrepentant Dodge Enthusiast

                  1951 Dodge M37 - Bone Stock
                  1958 Dodge M37 - Ex-Forest Service Brush Truck
                  1962 M37-B1 - Work in Progress
                  1962 Dodge WM300 Power Wagon - Factory 251, 4.89s
                  1944/1957 Dodge WM500T 6x6 Power Wagon - LA318-3, NP435, 5.83s, Power Steering, Undercab Power Brakes
                  1974 Dodge W200 - 360/727, Factory Sno-Fighter Package

                  Comment


                  • #24
                    Two pictures of one for a GM TH400 going in my '46 Chevy.

                    image4_opt.jpg

                    image1_opt.jpg

                    Comment

                    Working...
                    X