PDA

View Full Version : GREAT 4BT conversion FAQ found!

yosemitesamiam
11-19-2006, 12:25 AM
Beauty of a '43 Carryall. Did the conversion, and has a lot of great FAQ on the conversion to 4BT, NV4500 and NP205 Tcase. If you haven't seen some of this, you should go read!

http://imageevent.com/moosecreekmaple/nv4500slavefittingmodification

I have linked to the NV4500 Slave Fitting mod....however in the drop down list, there are lots of other pages, with pictures etc...

Great read, and thanks to whoever this is if you frequent this website!!!

Sam
JimmieD
11-19-2006, 01:00 AM
That's Paul in NY mentioned in other threads. One GREAT GUY! He has been an invaluable help to me with my conversion. Here's a link to Cabel Garbee's page, another fine fella who's been a lot of help to me...

http://www.garbee.net/~cabell/
yosemitesamiam
11-19-2006, 01:02 AM
That's Paul in NY mentioned in other threads. One GREAT GUY! He has been an invaluable help to me with my conversion. Here's a link to Cabel Garbee's page, another fine fella who's been a lot of help to me...

http://www.garbee.net/~cabell/


AH! I figured someone here knows him....after posting this, I noticed Ugg mentioned...LOL...there can only be one Ugg...! Thanks for the extra link!
JimmieD
11-19-2006, 10:29 AM
The world would be a dry and hollow place without our Mr. Ugg! Somewhat like the way Someone put the colors in flowers, the trees in the mountains, the cool breezes on a spring day: Ugg in Illinois! ha haha...

Both Paul and Cabell have been a great help to me as have many others: Gordon, Mopar Norm, Ron in Indiana, Rob Blair, PwrWgnDrvr, Jeff C, Will, Mike, Charles, and so many guys around here etc. etc. etc. Some great folks willing to help another. I could not have done my own 4BT project without all of their help! Gordon's and Norm's Forums have been an invaluable help and the actual key to success, virtually impossible without them, what more can I say!?!
MoparNorm
11-19-2006, 08:17 PM
The only problem with Paul...is that...he went... shall we say...a little Cummins nutso...He now has 37 Cummins powered trucks, a Cummins powered test stand, a Cummins powered blender, ...night light and Syrup centifuge, and ...the Cummins powered wind machine...he'll leave a light on for ya....
http://photos.imageevent.com/moparnorm/projectfile/websize/Pauls%20stash.bmp.jpg


MN
Ugg013
11-20-2006, 04:19 AM
The world would be a dry and hollow place without our Mr. Ugg! Somewhat like the way Someone put the colors in flowers, the trees in the mountains, the cool breezes on a spring day: Ugg in Illinois! ha haha...

Hi Sam:

Like said above about Paul, great guy. He's my inspiration.

Jimmie:

I hear they named a boot after me. Figures. HA!

Later
Ugg
yosemitesamiam
11-20-2006, 09:01 AM
Hi Sam:

Like said above about Paul, great guy. He's my inspiration.

Jimmie:

I hear they named a boot after me. Figures. HA!

Later
Ugg

Yes, Paul is a great guy! I have been in contact via email with him the last day now. Amazing!
Gordon Maney
11-26-2006, 01:22 PM
The only problem with Paul...is that...he went... shall we say...a little Cummins nutso...He now has 37 Cummins powered trucks, a Cummins powered test stand, a Cummins powered blender, ...night light and Syrup centifuge, and ...the Cummins powered wind machine...he'll leave a light on for ya....
http://photos.imageevent.com/moparnorm/projectfile/websize/Pauls%20stash.bmp.jpg


MN

Are you serious about the 37 ?
MoparNorm
11-28-2006, 07:32 PM
37 is a drivel derived figure....= ) He has 3 with up to 7 total in planning...= )
MN